A versatile masonry waterproofer that can be applied interior, exterior, vertical, horizontal, above or below grade. Guaranteed to stop water up to 4 psi and resists 98 mph hurricane winds.

Coats: Minimum 2 coats

Clean up: Soap and Water

Coverage: 90???100 square feet per gallon

Dry Time: 2 hours, 2 hours to recoat

Warranty: Fully transferable 7 year Warranty 

DRYLOK® Pourable Masonry Crack Filler is formulated to fill and seal small cracks in concrete surfaces, sidewalks, walkways, steps, patios, garage floors, and more.

It provides excellent adhesion, dries to the color of concrete and cleans up easily with soap and water.

Clean up: Soap and water

Coverage: 38? per 1?4? x 1?2? crack

Set Time: 12 hours

DRYLOK® Masonry Crack Filler seals, waterproofs and repairs cracks and mortar joints in concrete sidewalks, walls, steps, and floors. It dries to color of concrete, will not bleed, and cleans up in a jiffy with just soap and water. Designed to withstand foot and vehicle traffic.

Clean up: Soap and water

Coverage: 48 linear Feet with a 1?4? bead

Cure Time: 12 hours

Paint Time: Can be painted over in 1 hour

A clear, durable, water-repellent, specialty formulation for use on exterior, above-grade, vertical and horizontal brick and masonry surfaces. With just one coat, it minimizes the deterioration of masonry and mortar, and helps control efflorescence (salt deposits) and surface staining.

Coats: 1 coat

Clean up: Soap and Water

Coverage: 210 square feet per gallon

Dry Time: 30 minutes 

Porous materials like natural and man-made stone, concrete, stucco and masonry will start to break down, dust, pit, crack, and/?or stain when subjected to weather, water, oil, and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. 

Coats: 1 coat

Clean up: Soap and Water

Coverage: 400 square feet per gallon depending porosity of surface

Dry Time: 2 hours

The incorporation of DRYLOK® Non-Skid Texture Additive creates a slip-resistant coating that increases traction and helps prevent falls, accidents and injuries. Use it with DRYLOK® E1 Latex 1?Part Epoxy Concrete Floor Paint and other oil base, latex base or epoxy floor paints and clear coatings.

The addition of DRYLOK® Non-Skid Texture Additive will not change the drying characteristics of the paint.

Clean up: Vacuum or boom any spills

Coverage: 2???4 ounces added to 1 gallon of coating, depending on your desired level of slip-resistance

Dry Time: Follow dry times on coating?s package

The DRYLOK® Brush is a 4? synthetic bristle brush specially designed to hold heavy-bodied products such as DRYLOK® Original Concrete & Masonry Waterproofer, DRYLOK® Extreme Concrete & Masonry Waterproofer, DRYLOK® Latex Concrete Floor Paint and any other heavy duty coatings.

Clean up: Soap and water